Device Intake and Fault Recording
We identify the exact Lenovo K, VIBE, P or A model and record the reported symptoms, visible damage and any previous repairs. Available device functions are checked before disassembly.
Is the display on your Lenovo K no longer working, has your VIBE stopped charging, or does your Lenovo P switch off unexpectedly? At ARVUTIABI-ESOFT OÜ in Lasnamäe, Tallinn, we diagnose Lenovo K, VIBE, P and A smartphones from various generations. Before agreeing on a repair, we identify the exact device variant, assess the fault and check the availability of compatible parts.
Lenovo K, VIBE, P and A handsets differ in screen construction, batteries, charging connectors and motherboards. With older phones, we consider limited spare-part availability and the possibility of component-level repair. Diagnostics helps distinguish hardware failures from software problems; we agree on the scope and price before paid work begins.
+37256911777
| Service | Price |
|---|---|
| Smartphone diagnostics | * Free |
| Screen / display module replacement | From €50 |
| Display panel replacement | From €50 |
| Touchscreen / digitizer replacement | From €25 |
| Glass replacement | From €50 |
| Battery replacement | From €25 |
| Charging port replacement | From €20 |
| Speaker replacement | From €25 |
| Microphone replacement | From €25 |
| Camera replacement | From €30 |
| Button replacement | From €15 |
| Flex cable replacement | From €25 |
| Back cover replacement | From €35 |
| Firmware flashing / software recovery | From €15 |
Prices marked “from” are starting prices. The final repair cost depends on the device model, the nature of the fault, the required spare parts, and the diagnostic results.
The cost of diagnostics depends on the type of device and the complexity of the diagnostic work, but does not exceed €20.
* If the customer agrees to proceed with the repair, diagnostics are free of charge, as they are an integral part of the repair process. In this case, the customer pays only the agreed repair price.
We identify the exact Lenovo K, VIBE, P or A model and record the reported symptoms, visible damage and any previous repairs. Available device functions are checked before disassembly.
We test power, screen, charging, connectivity and the parts relevant to the reported problem. Measuring instruments and a microscope are used when required. The installed Android version is taken into account.
Components are matched to the precise Lenovo model, particularly for older K, VIBE, P and A devices. We explain limitations and whether repair is economically sensible, and confirm the price before paid work.
We carry out the approved work and then test affected functions: display, touch input, charging, audio, cameras, connectivity and boot stability.
A drop can leave bright marks, coloured lines, black areas or parts of the screen that no longer respond to touch. We check the display panel, touch layer, backlight where fitted and display-flex connection. Even visually similar Lenovo K models may use incompatible screens, so any replacement module is selected using the complete device model number.
If charging works only at a particular cable angle, stops intermittently or does not start, we first rule out the adapter and cable. Lenovo devices from different generations may use USB-C or Micro-USB. We inspect connector contacts, test the battery, check board-to-board connections and measure charging behaviour. We recommend port replacement only once its defect is confirmed.
A sudden drop in battery percentage, overnight discharge or shutdown under load is not always caused by an ageing battery alone. We assess battery condition, current consumption, app activity and the stability of key voltages. For older Lenovo phones we also confirm replacement-battery compatibility; a new battery is proposed only when testing supports it.
Instability may occur when opening an app, using the camera or even while the phone is idle. We compare these symptoms with device temperature, Android error behaviour and power measurements. Battery, motherboard and flex-connection faults are also considered. A factory reset before diagnosis can erase important files and may not resolve a hardware problem.
Camera errors, missing voice recordings and poor call audio involve different components. We inspect app permissions, protective meshes, contacts, connectors and flex cables, then test the relevant module. Camera configurations differ between Lenovo K variants, so testing is based on the actual device rather than assumptions about the series.
Moisture damage may appear gradually: contacts oxidise, charging becomes unstable or individual functions stop working. Using magnification, we inspect connectors, the battery area and accessible motherboard sections. A wet phone should be switched off and not connected to a charger. The prospects for recovery can be assessed only after examining the damage.
A phone that does not respond to its power button, shows only the start-up logo or repeatedly reboots may have storage, battery, power-circuit or system-file problems. We distinguish hardware defects from software faults. Flashing firmware or performing a reset requires prior agreement, as these operations may delete contacts, photos and other user data.
The phone may fail to register on a mobile network, disconnect from the router or refuse to pair with wireless devices. We test the SIM card, network settings, antenna contacts, RF connections and software configuration. Motherboard repair is considered after the affected component or circuit has been identified.
The workshop’s general price list states that smartphone diagnostics are free. The cost of any further repair depends on the findings and required parts.
Yes, such devices can be brought in for assessment. Repair feasibility depends on the particular phone, motherboard condition and availability of compatible components.
Sometimes, if the display panel and touch layer are working and the construction allows glass-only repair. In other cases a complete display module is needed.
Possible causes include a faulty adapter, a dirty or damaged connector, a battery problem or a charging-circuit fault. Connector type also varies by model.
Not necessarily. The cause may involve storage, power circuits or software. A reset or firmware flashing can erase personal data.
We investigate power, connectors and electronic components according to the symptoms. Component-level repair is not always feasible; this is assessed after diagnosis.
Data preservation cannot be guaranteed if storage or the motherboard is damaged or software recovery is needed. If the phone still works, we recommend backing up the data.
Timing depends on the fault complexity and parts delivery. Warranty conditions for the agreed work and installed parts are documented when the repair order is processed.